Blickdichter Sichtschutz für Tore und Türen

wodewa GATE / DOOR fastening clips for privacy strips for double rod mats The wodewa gate fastening clips have been specially developed and manufactured for the privacy protection strips for double bar mats. The clips are inserted between the vertical bars and the screen strip is held at the top and bottom by the fastening clip. NOTE for the 6/5/6 and 8/6/8 double wire mesh construction types: The first two numbers(6/x/6 or(8/x/8) describe the diameter in mm of the horizontal or horizontal parallel bars. The middle number (x/5/x or x/6/x) describes the diameter in mm of the rods running vertically or vertically. We kindly ask you to check your double rod mats before you place your order, as our privacy protection strips and fastening clips are produced for each construction type. Scope of delivery: 2 pieces

Product description OAK: The high-quality wodewa acoustic panels oak TREND LIGHT, oiled are very well suited as wall and ceiling panels for indoor use. The solid oak slats are sourced regionally from our region and are from sustainable forestry. The trendy look is defined by the continuous wooden slats. Structure: Slats: Solid oak, 6 mm high Carrier: HDF black lacquered, 3mm high Due to the low weight, processing is very easy and the areas of application are very wide. The 3mm thick carrier has no sound-absorbing effect, only a sound-reflecting effect. The Ligth acoustic panel has an advantage for room acoustics and the room climate. The 3mm black lacquered carrier is itself 100% recyclable! Healthy living, working and living are very important. The furnishing of our rooms and the design of our walls and ceilings have a significant influence on room acoustics. The reverberation time in a room influences our personal perception of whether we feel comfortable in a room. With wodewa acoustic panels and the right application, room acoustics can be significantly improved. Our products are manufactured in compliance with ESG. E = Environment / ecological responsibility S = Social / Social responsibility G = Governance / Corporate management / Supervisory structures If you would like to optimize the room acoustics to an optimum reverberation time of 0.5-1.0 sec, please contact our customer service department. We will work with you to plan the optimum application of our acoustic panels in your rooms. Customization through the use of stronger sound absorbers / acoustic fleece is possible on request. Product details: suitable as wall and ceiling panels for indoor use Significant improvement in room acoustics Solid wood slats from sustainable forestry 3mm black lacquered carrier board Dimensions: 800mm x 160mm x 9mm (1 panel) Package contents: 1 panel (800mm x 160mm x 9mm) very low weight: 3.5 kg/m2 quick and easy installation by gluing or screwing Very good room acoustics without additional substructure 100% Made in Germany! completely recyclable easy to clean surfaces can be combined with our other products in the wodewa family (wall cladding / wooden lamps)

Product description OAK: The high-quality wodewa acoustic panels oak TREND LIGHT, oiled are very well suited as wall and ceiling panels for indoor use. The solid oak slats are sourced regionally from our region and are from sustainable forestry. The trendy look is defined by the continuous wooden slats. Structure: Slats: Solid oak, 6 mm high Carrier: HDF black lacquered, 3mm high Due to the low weight, processing is very easy and the areas of application are very wide. The 3mm thick carrier has no sound-absorbing effect, only a sound-reflecting effect. The Ligth acoustic panel has an advantage for room acoustics and the room climate. The 3mm black lacquered carrier is itself 100% recyclable! Healthy living, working and living are very important. The furnishing of our rooms and the design of our walls and ceilings have a significant influence on room acoustics. The reverberation time in a room influences our personal perception of whether we feel comfortable in a room. With wodewa acoustic panels and the right application, room acoustics can be significantly improved. Our products are manufactured in compliance with ESG. E = Environment / ecological responsibility S = Social / Social responsibility G = Governance / Corporate management / Supervisory structures If you would like to optimize the room acoustics to an optimum reverberation time of 0.5-1.0 sec, please contact our customer service department. We will work with you to plan the optimum application of our acoustic panels in your rooms. Customization through the use of stronger sound absorbers / acoustic fleece is possible on request. Product details: suitable as wall and ceiling panels for indoor use Significant improvement in room acoustics Solid wood slats from sustainable forestry 3mm black lacquered carrier board Dimensions: 800mm x 160mm x 9mm (1 panel) Package contents: 1 panel (800mm x 160mm x 9mm) very low weight: 3.5 kg/m2 quick and easy installation by gluing or screwing Very good room acoustics without additional substructure 100% Made in Germany! completely recyclable easy to clean surfaces can be combined with our other products in the wodewa family (wall cladding / wooden lamps)

Product description OAK: The high-quality wodewa acoustic panels oak TREND LIGHT, oiled are very well suited as wall and ceiling panels for indoor use. The solid oak slats are sourced regionally from our region and are from sustainable forestry. The trendy look is defined by the continuous wooden slats. Structure: Slats: Solid oak, 6 mm high Carrier: HDF black lacquered, 3mm high Due to the low weight, processing is very easy and the areas of application are very wide. The 3mm thick carrier has no sound-absorbing effect, only a sound-reflecting effect. The Ligth acoustic panel has an advantage for room acoustics and the room climate. The 3mm black lacquered carrier is itself 100% recyclable! Healthy living, working and living are very important. The furnishing of our rooms and the design of our walls and ceilings have a significant influence on room acoustics. The reverberation time in a room influences our personal perception of whether we feel comfortable in a room. With wodewa acoustic panels and the right application, room acoustics can be significantly improved. Our products are manufactured in compliance with ESG. E = Environment / ecological responsibility S = Social / Social responsibility G = Governance / Corporate management / Supervisory structures If you would like to optimize the room acoustics to an optimum reverberation time of 0.5-1.0 sec, please contact our customer service department. We will work with you to plan the optimum application of our acoustic panels in your rooms. Customization through the use of stronger sound absorbers / acoustic fleece is possible on request. Product details: suitable as wall and ceiling panels for indoor use Significant improvement in room acoustics Solid wood slats from sustainable forestry 3mm black lacquered carrier board Dimensions: 800mm x 160mm x 9mm (1 panel) Package contents: 1 panel (800mm x 160mm x 9mm) very low weight: 3.5 kg/m2 quick and easy installation by gluing or screwing Very good room acoustics without additional substructure 100% Made in Germany! completely recyclable easy to clean surfaces can be combined with our other products in the wodewa family (wall cladding / wooden lamps)

Product description OAK: The high-quality wodewa acoustic panels oak TREND LIGHT, oiled are very well suited as wall and ceiling panels for indoor use. The solid oak slats are sourced regionally from our region and are from sustainable forestry. The trendy look is defined by the continuous wooden slats. Structure: Slats: Solid oak, 6 mm high Carrier: HDF black lacquered, 3mm high Due to the low weight, processing is very easy and the areas of application are very wide. The 3mm thick carrier has no sound-absorbing effect, only a sound-reflecting effect. The Ligth acoustic panel has an advantage for room acoustics and the room climate. The 3mm black lacquered carrier is itself 100% recyclable! Healthy living, working and living are very important. The furnishing of our rooms and the design of our walls and ceilings have a significant influence on room acoustics. The reverberation time in a room influences our personal perception of whether we feel comfortable in a room. With wodewa acoustic panels and the right application, room acoustics can be significantly improved. Our products are manufactured in compliance with ESG. E = Environment / ecological responsibility S = Social / Social responsibility G = Governance / Corporate management / Supervisory structures If you would like to optimize the room acoustics to an optimum reverberation time of 0.5-1.0 sec, please contact our customer service department. We will work with you to plan the optimum application of our acoustic panels in your rooms. Customization through the use of stronger sound absorbers / acoustic fleece is possible on request. Product details: suitable as wall and ceiling panels for indoor use Significant improvement in room acoustics Solid wood slats from sustainable forestry 3mm black lacquered carrier board Dimensions: 800mm x 160mm x 9mm (1 panel) Package contents: 1 panel (800mm x 160mm x 9mm) very low weight: 3.5 kg/m2 quick and easy installation by gluing or screwing Very good room acoustics without additional substructure 100% Made in Germany! completely recyclable easy to clean surfaces can be combined with our other products in the wodewa family (wall cladding / wooden lamps)